Commercial Compact • 50 LPHEngineer ETA: 45 – 60 Minutes (Rapid Tri-City Dispatch)ISO 9001 • MSME Registered

50 LPH Commercial RO System
Repair & Breakdown Service in Chandigarh

Immediate on-site response for pump trip, zero permeate output, membrane blowout, electrical short circuits, and multiport leaks with genuine certified spares. Engineered for businesses, healthcare facilities, cafes, and industrial manufacturing units across Chandigarh dealing with heavy mineral hardness and borewell TDS spikes (450 – 850 PPM).

Same-Day On-Site Diagnostic
Genuine Dow / Hydranautics Spares
90-Day Written Warranty
Official GST B2B Invoicing
Transparent B2B Pricing

Technician Service Charge

1500+ GST
Industrial Plant Service (Domestic Visit: ₹300)

This is the service charge of the certified technician—covers doorstep industrial engineer visit anywhere in Chandigarh, complete hydraulic pressure testing up to 210 PSI, flow profiling, and diagnostic labor. Replacement spare parts, new membranes, and CIP chemicals are extra as required on site.

Target Output Rate:50 Litres / Hour (1,200 LPD)
Response Turnaround:60 – 90 Mins Arrival
Coverage Hubs:6 Industrial Zones
Request Instant Quote

Commercial RO vs. Domestic RO Pricing Notice: Commercial plant servicing requires industrial diagnostic manifolds, high-pressure gauges, and chemical descaling loops.

Unlike domestic home purifiers (where basic technician visit starts at ₹300), commercial RO plant technician service charges start from ₹1,500. This fee is the dedicated service charge of the certified industrial technician (covering on-site arrival in Chandigarh, hydraulic pressure diagnostics, flow profiling, and on-site inspection labor). Cost of replacement membranes, spare parts, and CIP descaling chemicals is extra as per site requirements.

System Sizing Selector

Commercial RO Capacity Specifications

Select a commercial capacity rating below to inspect technical specifications, membrane requirements, and matching applications in Chandigarh.

Active Capacity

50 LPH Commercial RO System

50 Litres / Hour (1,200 LPD)

Membrane Elements

Dual 150/300 GPD High-Flux TFC Polyamide Membrane

99.2% Salt Rejection

High-Pressure Booster

Dual High-Torque 24V/36V Booster Pumps

80 – 110 PSI (5.5 – 7.6 Bar)

Pre-treatment Columns

Twin 20" Jumbo Big-Blue Pre-Filter Housings

Multiport Valves Included

Chemical Antiscalant Dosing

Inline Antiscalant Scale Guard Housing

Prevents Scale Encapsulation

Recovery & TDS Tolerance

Handles feed water TDS up to 1500 PPM35% – 45%

Optimized for Chandigarh

Automation & Protection

Fully Automatic Micro-switch Cutoff with Dry Run Protection

Single Phase 230V Standard AC

Target Applications for 50 LPH Commercial RO System:

Small Offices (10–25 people)Clinics & PharmaciesCoffee Shops, Bakeries & PantriesJuice Bars & EateriesSmall Educational AcademiesExecutive Suites
Standard Operating Procedure

Emergency Diagnostic & Fast On-Site Repair for Commercial RO Plants

Commercial water purifiers operate under severe hydraulic pressure (up to 200+ PSI). Our engineers follow certified industrial protocols to ensure safe operating conditions and protect your equipment from premature degradation.

01

Root Cause Isolation

Isolate electrical, hydraulic, or membrane failure within 20 mins.

02

Defective Part Overhaul

Replace or rebuild failed pump seals, valves, or electronic controllers.

03

Pressure Testing

Pressurize plant to 180+ PSI to confirm leak-proof integrity.

04

Output Quality Sign-Off

Ensure TDS is within safe drinking water limits (<100 PPM) before departure.

Standard Checklist & Deliverables

Rapid diagnostic of vertical multistage high-pressure pump (mechanical seal, bearings, impeller)
Membrane integrity testing to identify compromised elements, cracked vessels, or O-ring blowouts
Multiport valve leakage repair, spider gasket replacement, and rotor re-seating
Microprocessor control panel troubleshooting, relay replacement, and sensor rewiring
Solenoid valve (SV), low-pressure switch (LPS), and float switch fault rectification
Pipeline fracture repair, UPVC/SS fitting replacement, and high-pressure union tightening
Antiscalant dosing pump diaphragm and check-valve replacement
Immediate delivery and fitting of genuine 4040/8040 replacement membrane elements on site
Troubleshooting Matrix

Common Commercial RO Breakdown Symptoms

Experiencing plant alarms or sudden water cutoffs in Chandigarh? Here are the four most frequent failure modes we diagnose and repair on-site daily:

High Priority

Low Pure Water Flow / Choked Membrane

Symptom: Water output drops by 50% or more while reject flow increases heavily; high-pressure pump runs continuously.

Engineering Solution: Chemical CIP (Clean-In-Place) acid & alkali circulation or replacement with genuine Dow/Hydranautics elements.
Dispatch Engineer for this Issue
Critical (Health/Compliance)

High Product Water TDS (>150 PPM)

Symptom: Treated water tastes saline or mineralized; TDS reading crosses acceptable WHO/BIS threshold.

Engineering Solution: Pressure vessel autopsy, seal ring renewal, and precise membrane element replacement.
Dispatch Engineer for this Issue
Immediate Breakdown

High-Pressure Pump Tripping or Severe Vibration

Symptom: Pump makes a grinding noise, overheats, trips MCB within seconds of turning on, or leaks water from seal.

Engineering Solution: On-site pump overhaul, mechanical seal replacement, impeller clearance adjustment, and electrical rewind.
Dispatch Engineer for this Issue
Medium Priority

Multiport Valve Leakage or Silt Bypass

Symptom: Water continually bypasses to drain line during filter mode; sand or activated carbon particles enter pre-filters.

Engineering Solution: Gasket replacement, valve rotor re-seating, or media vessel re-bedding with washed virgin carbon.
Dispatch Engineer for this Issue
Local Ground Intelligence • Chandigarh

Water Quality Challenges in Chandigarh

Municipal water supplied from Kajauli Waterworks is heavily mixed with groundwater tube-wells across Chandigarh sectors, creating erratic TDS spikes up to 800+ PPM with pronounced calcium carbonate hardness. This causes rapid scale calcification on high-pressure pump impellers, boilers, and membrane surfaces unless regulated by periodic CIP descaling and TDS controllers.

Primary Coverage Hubs & Industrial Zones:

Chandigarh Industrial Area Phase 1Chandigarh Industrial Area Phase 2Sector 17 City Commercial HubSector 34 Commercial & Banking CorridorSector 26 Grain & Food MarketMadhya Marg Commercial Complex
Dedicated commercial field vehicles operating 7 days a week across Chandigarh.
Call +91 75298 40722
Got Questions?

Frequently Asked Questions

Chat with an Expert