50 LPH Commercial RO System
Service & Maintenance in Chandigarh
Restore peak filtration recovery, clear mineral deposits, sanitize vessels, and prevent costly high-pressure pump burnouts with professional multi-point maintenance. Engineered for businesses, healthcare facilities, cafes, and industrial manufacturing units across Chandigarh dealing with heavy mineral hardness and borewell TDS spikes (450 – 850 PPM).
Technician Service Charge
This is the service charge of the certified technician—covers doorstep industrial engineer visit anywhere in Chandigarh, complete hydraulic pressure testing up to 210 PSI, flow profiling, and diagnostic labor. Replacement spare parts, new membranes, and CIP chemicals are extra as required on site.
Commercial RO vs. Domestic RO Pricing Notice: Commercial plant servicing requires industrial diagnostic manifolds, high-pressure gauges, and chemical descaling loops.
Unlike domestic home purifiers (where basic technician visit starts at ₹300), commercial RO plant technician service charges start from ₹1,500. This fee is the dedicated service charge of the certified industrial technician (covering on-site arrival in Chandigarh, hydraulic pressure diagnostics, flow profiling, and on-site inspection labor). Cost of replacement membranes, spare parts, and CIP descaling chemicals is extra as per site requirements.
Commercial RO Capacity Specifications
Select a commercial capacity rating below to inspect technical specifications, membrane requirements, and matching applications in Chandigarh.
50 LPH Commercial RO System
Membrane Elements
Dual 150/300 GPD High-Flux TFC Polyamide Membrane
99.2% Salt RejectionHigh-Pressure Booster
Dual High-Torque 24V/36V Booster Pumps
80 – 110 PSI (5.5 – 7.6 Bar)Pre-treatment Columns
Twin 20" Jumbo Big-Blue Pre-Filter Housings
Multiport Valves IncludedChemical Antiscalant Dosing
Inline Antiscalant Scale Guard Housing
Prevents Scale EncapsulationRecovery & TDS Tolerance
Handles feed water TDS up to 1500 PPM • 35% – 45%
Optimized for ChandigarhAutomation & Protection
Fully Automatic Micro-switch Cutoff with Dry Run Protection
Single Phase 230V Standard ACTarget Applications for 50 LPH Commercial RO System:
Comprehensive Preventive Maintenance & Chemical Descaling (CIP)
Commercial water purifiers operate under severe hydraulic pressure (up to 200+ PSI). Our engineers follow certified industrial protocols to ensure safe operating conditions and protect your equipment from premature degradation.
Hydraulic Inspection
Verify feed pressure, reject flow volume, and check for bypass leaks.
Media Vessel Backwash
Flush suspended silt and regenerate activated carbon bed.
Membrane CIP Descaling
Circulate food-grade descaling reagents to eliminate membrane bio-film.
TDS & Flow Calibration
Measure permeate TDS, set recovery ratio, and log system efficiency.
Standard Checklist & Deliverables
Common Commercial RO Breakdown Symptoms
Experiencing plant alarms or sudden water cutoffs in Chandigarh? Here are the four most frequent failure modes we diagnose and repair on-site daily:
Low Pure Water Flow / Choked Membrane
Symptom: Water output drops by 50% or more while reject flow increases heavily; high-pressure pump runs continuously.
High Product Water TDS (>150 PPM)
Symptom: Treated water tastes saline or mineralized; TDS reading crosses acceptable WHO/BIS threshold.
High-Pressure Pump Tripping or Severe Vibration
Symptom: Pump makes a grinding noise, overheats, trips MCB within seconds of turning on, or leaks water from seal.
Multiport Valve Leakage or Silt Bypass
Symptom: Water continually bypasses to drain line during filter mode; sand or activated carbon particles enter pre-filters.
Water Quality Challenges in Chandigarh
Municipal water supplied from Kajauli Waterworks is heavily mixed with groundwater tube-wells across Chandigarh sectors, creating erratic TDS spikes up to 800+ PPM with pronounced calcium carbonate hardness. This causes rapid scale calcification on high-pressure pump impellers, boilers, and membrane surfaces unless regulated by periodic CIP descaling and TDS controllers.
Primary Coverage Hubs & Industrial Zones:
Client Reviews & Plant Audit Ratings in Chandigarh
Over 1,58,466+ verified service bookings completed across Chandigarh and Punjab with direct technician communication.
"RimZim RO's industrial engineer reached our manufacturing facility in Chandigarh within 2 hours. Carried out complete pressure diagnosis and restored our 50 LPH Commercial RO System plant's flow from 180 LPH back to peak 500 LPH without replacing expensive membranes."
"We have a commercial RO plant running 16 hours daily. Their certified technician overhauled the vertical multistage booster pump seals and re-bedded the dual FRP media vessels. Seamless service and transparent GST invoicing."
"Zero downtime for our restaurant kitchen in Chandigarh. Emergency breakdown call was attended within 90 minutes. Certified technician visit charge @ ₹1,500 was reasonable for heavy commercial equipment inspection."